Gullco GK-200-RLx-L - Manual (Page 7)

5
OPERATION
The electrical and mechanical installation of the “KAT”
®
Carriage/Compact Oscillator system is
explained in the Technical Manual (GD-057-T).
Local Control Devices
The Power On/Off switch is used to disconnect the power to the rest of the control circuitry.
I = On, O = Off.
WARNING! Always turn the main power off before connecting/disconnecting the oscillator head
cable to/from the “KAT”
®
carriage. Failure to comply may result in control damage.
Oscillator Head Connector
Arc Activation Signal Connector
(Trigger Signal)
Oscillator Control Carriage Motor Control
Fuse Holder
Power On/Off Switch