Gullco GM-03-300 - Manual (Page 4)

2
SAFETY INSTRUCTIONS
The following cautionary/warning label is attached to each “MOGGY” carriage:-
The below label pictorially represents the following:
“Warning:-
Read the manual before turning the unit on and before performing service.
Also, positively disconnect the unit from all power supplies before servicing!”
IMPORTANT
WARNING!
STRONG MAGNETIC FORCES
BE AWARE OF POTENTIAL PINCH HAZARD
USE EXTREME CAUTION WHEN INSTALLING
& DURING USE
MAGNETIC ATTRACTION CAN RESULT IN
EQUIPMENT SNAPPING TO OTHER ITEMS, OR
VISE-VERSA
READ THIS BEFORE OPERATING THE “MOGGY” CARRIAGE
Ensure that an adequate and well-maintained weld return path is provided with good electrical
contact. Failure to do so may result in the welding current passing through the carriage and
damaging the wiring and electrical components.
Important information regarding safety and operation of the “GSP” motor control used in the
“MOGGY” carriage is contained in a supplemental manual attached at the end of the Technical
Manual. It is equally important to read, understand and apply the information contained within the
manual. The manual (GD-031) has a title “Technical Information For The Gullco “GSP” Micro-
Processor Based, 24 Volt DC Motor Control”, and it’s pages are numbered with a prefix of “T“.
Warranty will be void if genuine Gullco replacement parts are not used.