Gullco GM-03-300 - Manual (Page 16)

14
OPTIONAL ACCESSORIES
GK-194-O-330 RADIAL OSCILLATOR PACKAGE FOR “MOGGY”
The radial oscillator package for “MOGGY” travel
carriages, provides a motorized mechanism to oscillate
(weave) the welding gun across the joint, while the
“MOGGY” provides the weld travel motion. The radial
oscillator head replaces the standard gun holder
assembly and is mounted to the 7/8” Ø spigot
protruding from the adjustable slides. The package
comes complete with adjustable mounting brackets,
radial oscillator head, extended length guide arms,
control cable and control pendant available in either 42,
115 or 230 VAC, single phase, 50/60 Hz., 30 watts.
Refer to the Technical Manual for component details.
GM-01-065 & GM-01-065-M “MOGGY” CUTTING TORCH HOLDER ASSEMBLIES
By replacing the standard gun holder assembly with a “MOGGY” cutting torch holder assembly, the
“MOGGY” carriage is able to position and clamp any standard 1-3/8” [35mm] diameter, 32 pitch
rack (using a GM-01-065), or a 1-1/4” [32mm] diameter, 32 pitch rack (using a GM-01-065-M),
machine type cutting torch (or TIG torch). The “MOGGY” cutting torch holder assembly provides
ease of positioning of the cutting torch through easy to use adjustable hand levers and knobs (no
tools necessary), and various linear and rotational adjustments. The torch holder clamp is
equipped with a knob and pinion to provide torch height adjustment in addition to the horizontal and
vertical slides of the “MOGGY”. Refer to the Technical Manual for component details.