Gullco GM-03-300 - Manual (Page 17)

15
Optional Accessories Continued…
GM-01-091 INNER RADIUS GUIDE ARM ASSEMBLY
This attachment kit allows the leading guide roller to be moved further forward of the “MOGGY”
carriage than normal, allowing the “MOGGY” carriage to track along the inside face of small radii
applications. Refer to the Technical Manual for component details.
GM-03-059 & GM-03-060 ADJUSTABLE GUIDE WHEEL ASSEMBLIES
These versatile guide wheel assemblies allow extra height and angular adjustment to facilitate the
tracking of vertical faces that would otherwise be out of reach of the standard, fixed height, guide
wheels supplied with the “MAGNETIC MOGGY”. These adjustable guide wheel assemblies readily
attach to the end of standard guide arms supplied on “MAGNETIC MOGGY’s” with serial numbers
greater than 11466. (For “MAGNETIC MOGGY’s” with serial numbers prior to 11466, the GM-03-
028 Guide Arms will need to be ordered separately). The GM-03-059 is recommended for most
applications requiring adjustable guide wheels, as the guide roller has a larger, more durable face.
The GM-03-060 is recommended for applications such as small lap joints, as it has a smaller face
and finer taper. The sketches below show two examples using these adjustable guide wheel
assemblies. Refer to the Technical Manual for component details. GM-03-059 shown below left &
GM-03-060 shown below right.
Note: wheels not exactly as shown, for
illustrative purposes only