Grip Factory Munich GF-Quad Dolly - Manual (Page 24)

- 23 -
Wing nut for
wheel brake
Wing nut lock
7 GF-Quad Dolly brakes
To avoid unwanted movement or rolling of the GF-Quad Dolly, there are 2
brakes located on the front wheel axle to brake the standard pneumatic
wheels. The track wheels also have integrated brakes.
Pneumatic wheel brakes
By turning the wing nut, the brake
pressure can be applied or released.
Ensure that both brakes are secured
with equal pressure on each side of the
front axle.
Attention:
Prior to assembling
the pneumatic
wheels, ensure that both brakes are Pneumatic wheel brake
opened fully. If a brake is not opened
fully, the wheel cannot be mounted!
Track wheel brakes
By turning the wing nut, the brake
pressure can be applied or released.
As opposed to the pneumatic wheels,
track wheel brakes are located on each
wheel unit allowing the front and rear
axles to be locked.
Track wheel brake
8 Transporting the GF-Quad Dolly
For transportation, remove all lose accessories
such as seats, seat arms, camera mounts etc.
To keep the dolly as compact as possible, fold the
Transport position
steering rod onto the platform by removing the
locking pin and loosening the locking lever.
Attention: When transporting any items
in vehicles, all lose objects
must be strapped down with
lashing straps etc. and secured
against unwanted shifting.
Compact transport