Grip Factory Munich GF-Quad Dolly - Manual (Page 22)

- 21 -
Secure the rod by inserting the locking pin and screwing it into place.
Adjusting the push bar
6.7 Tripod
The 3 tripod connection holes found on the GF-Quad
Dolly‟s main platform
provide 2 methods to mount a tripod:
Procedure for method 1:
The tripod is placed in the tripod leg fittings and secured.
Bolt the tripod leg fittings to the dolly, securing them from
underneath the platform with the respective M 10 cap screw then
hand tighten with the sized 10 Allen Key.
When the fittings are in position, position the 3 tripod legs.
Upon placing the 3 tripod legs in the fittings on the dolly, secure
each one with the locking fasteners turning each of the 2
locking screws until hand tight.
Locking
pin
Retracted
push bar
Extended
push bar