Grip Factory Munich GF-Quad Dolly - Manual (Page 12)

- 11 -
Steering rod mount
with connection hole
and 3, angle
positioning holes
Safety pin, in
storage position
Locking lever Threaded sleeve
insert on the
steering rod fork
3 Steering rod assembly and functions
By correctly using the steering rod it is possible to manoeuvre the GF-Quad
Dolly with extreme precision. To mount and adjust the steering rod, please
proceed as follows:
Position the forked steering rod centrally on the steering rod mount
located on the rear axle of the dolly.
Connect the steering rod to the mount by inserting the locking lever and
screwing it into the threaded sleeve on the steering rod fork.
Attention: To operate correctly, when connecting the steering rod,
ensure that the threaded sleeve insert is always on the
opposite side of the rod to the locking lever.
Mounting the steering rod
To enhance the GF-
Quad Dolly‟s flexibility there are 3 further steering
applications
Application 1, fixed push bar function:
By connecting with the safety pin, there are 3 set angles (0°, 60° or
90°) were the steering rod can be used like a push bar. Proceed as
follows:
Loosen the steering rod by undoing the locking lever until
the steering rod is easily repositioned.
Fix the steering rod at 1 of the 3 positions by inserting the
safety pin at 0°, 60° oder 90° and lock securely by
retightening the locking lever.
Safety pin hole for
fixed angle positions