Grip Factory Munich GF-Quad Dolly - Manual (Page 18)

- 17 -
M 10 Socket Bolts
Locking ring
Locking Lever
Turnstile Mount
6.2 Turnstile Mount
The turnstile mount allows the camera operator and assistant to assemble 2
seats on the dolly platform and to rotate 360° around the central Euro-adapter.
Further camera positions can be achieved by mounting risers, ball or off-set
adapters etc.
To assemble, please proceed as follows:
To assemble the turnstile mount please proceed in the same manner as
described in § 6.1 on page 16. The turnstile mount is connected in the
same manner as the Euro-adapter plate and secured from underneath
the platform with the respective bolts.
Assembling the turnstile mount and adjustable riser
6.3 Euro-adapter based accessories
As described in § 6.1
„Euro-adapter plate“, the Euro-adapter serves as a
connection for various camera mounts such as the GFM Adjustable Riser.
To assemble, please proceed as follows:
Open the locking ring at the bottom of the adjustable riser and fit the
riser onto the Euro-adapter so that it sits correctly.
By turning the locking handle, close the locking ring until the riser is
locked securely to the Euro-adapter and all play in the fitting is
removed.