Grip Factory Munich GF-Quad Dolly - Manual (Page 10)

- 9 -
Wheel axle
with knurled
knob
To mount the wheels proceed as follows:
By holding the knurled knob, insert the axle
into the axle connection as far as it will go.
Pressing the axle inwards, rotate it until
the flat rotation restrictor on the axle meets with
the flat rotation restrictor on the axle connection
and insert fully.
Pneumatic wheel
Montage der Luftreifen
Mounting the pneumatic wheel
An alternative method is to align the 2 flat rotation restrictors
in advance and insert fully until connected completely.
Tip:
The wheels are mounted correctly when:
The flat rotation restrictor on the axle is covered by the flat rotation
restrictor on the axle connection
The locking pin is inserted fully (
audible “click”)
The axle cannot rotate or be removed (unless by disengaging the
locking pin)
Attention: Prior to mounting the pneumatic wheels, ensure that the
wheel brakes are opened fully.
It‟s not possible to mount
the pneumatic wheels when the brake is in the locked
position!
Wheel
brake
Locking pin