Grip Factory Munich GF-Quad Dolly - Manual (Page 17)

- 16 -
Euro-adapter Euro-adapter plate
M 10 Socket Bolts
6 Mounting accessories
6.1 Euro-adapter plate
To enable the fitting of various camera
mounting accessories such as risers, ball
and off-set adapters etc. there are 5
positions on the GF-Quad Dolly platform
to mount a Euro-adapter.
Please proceed as follows:
Connections for Euro-adapter plate
From underneath the dolly, insert 3 x M10 socket bolts consecutively
through the platform and into the Euro-adapter plate, tightening them
with the sized 10 Allen Key. Ensure that the Euro-adapter plate is
positioned correctly in the fitting and that the bolts are tightened
securely.
Tip: To simplify the assembly of the Euro-adapter, stand the
dolly lengthwise , balanced on the sides of 2 wheels.
In this case, make sure the wheels are not turned but
rather aligned in a straight line so the dolly cannot topple
over.
Mounting the Euroadapter