Grandstream Wave - Manual (Page 52)

Firmware Version 1.0.1.21 Grandstream Wave User Guide Page 51 of 64
Activate
Account It is used to define whether to activate account.
Account Name The name associated with each account to be
displayed on the LCD.
SIP Server Domain name or IP address, provided by your VoIP
service provider (ITSP).
SIP User ID User account information, provided by your VoIP
service provider (ITSP). It's usually in the form of
digits similar to phone number or the same as the
phone number.
SIP
Authentication
ID SIP service subscriber's Authenticate ID used for
authentication. It can be identical to or different from
the SIP User ID.
Password The account password required for Grandstream
Wave to authenticate with the ITSP (SIP) server
before the account can be registered.
VoiceMail
UserID To retrieve voicemail by pressing the LISTEN button
on the message screen. This ID is usually the VM
portal access number. For example, the UCM server
voicemail access number is *97.
Display Name The SIP user uses to display on LCD when calling, it
needs SIP server to support it if this function is
enabled.
After configuring the account, users could tap on the existing account for more settings, such as General
Settings, SIP Settings, Network Settings and Codec Settings.
Table 3: Account Settings—General Settings Parameters
Activate
Account It is used to configure whether to activate account.
Set as Default It is used to set this account as default.
Edit Account It is used to configure the account parameters.
Delete
Account It is used to delete the current account.
Table 4: Account Settings—Call Settings Parameters