Grandstream UCM6510 basic setup guide - Manual (Page 5)

UCM6510 Basic Configuration Guide Page 4 of 29
OVERVIEW
This document will provide instructions on how to set up a UCM6510 from an out of the box state to a fully
functional state. This includes design considerations, creating user extensions, provisioning endpoints with
Zero-Config, conferencing, auto attendant configuration, analog/VoIP trunks, routing inbound/outbound
calls and voicemail/fax to email setup.
For detailed information in regards to parameters that are encountered in this guide, please refer to the
UCM6510 series User Manual .