Grandstream UCM6510 basic setup guide - Manual (Page 11)

UCM6510 Basic Configuration Guide Page 10 of 29
Figure 7: Create New SIP Extension
4. After clicking “Save” the Extensions page will display with the single SIP extension that was just
created. Here the user has the ability to edit the extensions by clicking on at the right.
Figure 8: Create User Extension - Created Single User
STEPS ON ADDING BATCH OF EXTENSIONS
1. Navigate to PBX->Basic/Call Routes->Extensions
2. Click on “Batch Add Extensions” and then select “Batch Add SIP Extension” from the drop down list.