GAI-Tronics 12826-001 Hazardous Area ICS SmartSeries PCBA Upgrade Kit - Manual

Pub. 42003-258C
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Hazardous Area ICS SmartSeries PCBA
Upgrade Kit
Model 12826-001
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12826-001 Hazardous Area ICS SmartSeries PCBA Upgrade Kit adds microprocessor control
to the ICS Page/Party
®
station, providing additional sensor and monitoring capabilities. It can be used
with or without ADVANCE head-end equipment.
The Hazardous Area ICS SmartSeries PCBA Upgrade Kit provides the following components:
Qty Description
1 ICS SmartSeries Module PCBA
1 Ribbon Cable Assembly
3 F/F Nylon standoffs, 1.25-inches long
1 M/F Standoff, 1.25-inches long
6 Screw, 4
 5/16-inch PHTF
1 Screw, 4-40
 ¼-inch PHMS
1 Label, Upgrade Kit
Installation
WARNING
Before performing any of the following settings and adjustments, remove all
power from the station.
WARNING
To reduce the risk of hazardous atmospheres, disconnect the equipment
from the supply circuit before making any adjustments to the amplifier’s handset level.