GAI-Tronics 12557-001 Smart Station Baseboard Replacement Kit - Manual (Page 3)

Pub. 42003-161
12557-001 R EPLACEMENT PCBA K IT Page: 3 of 3
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-161.doc
9/96
9. Secure the PCBA with the existing standoffs.
10. Plug the Model 69228 PCBA back into J1 on the Model 69227 PCBA, and secure it with the existing
screws.
11. Reconnect the spade lugs. See Figure 1.
12. Reattach the aux/subset connector at J2 on the Model 69228 PCBA (for Model 701-804 only).
13. Reconnect the 12-conductor wire harness from the Model 69241 baseboard to Model 69242 on the
front panel at J1.
14. Reattach the chassis to the front panel; secure the top and bottom chassis screws.
15. Plug the amplifier into the enclosure, and tighten the four front panel screws.
16. Reapply the power to the station.
Figure 1.