GAI-Tronics 12519-002 Hook Assembly Kit (700 Series) - Manual

Pub. 42003-039A
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Stationary Cradle Assembly Replacement Kit
Model 12519-002
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information which is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12519-002 Stationary Cradle Assembly Replacement Kit is for use on the following
components:
• 519-102 • 601-101 • 601-102 • 701-201
• 701-202 • 701-203 • 701-204 • 701-205
• 711-002 • 711-101 • 7115-002 • 7115-101
• 716-002 • 716-101 • 7165-002 • 7165-101
This kit includes the following components:
Qty Description
1 Cradle Gasket
1 Cradle
2 Screws
2
Plastic Shoulder Washers
Installation
Removal of old cradle assembly
1. Loosen the four screws on the front panel and remove the amplifier from the enclosure.
2. Models 711-002, 711-101, 7115-002, 7115-101, 716-002, 716-101, 7165-002, 7165-101:
Using a small standard screwdriver, remove four screws securing back panel to chassis.
All other models: Using a hex nut driver, loosen the four screws – two are on the top surface of the
amplifier and two are on the bottom – holding the front panel to the chassis.