GAI-Tronics 12512-001 Ind. Tel. Hookswitch Assembly Kit - Manual

Pub. 42003-023E
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Hookswitch Assembly
Replacement Kit
Model 12512-001
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12512-001 Hookswitch Assembly Replacement Kit is designed for use on the following
telephones:
 24x Series  272-001
 25x Series  341-001
 262-001  351-001
Qty Description
1 Cradle/Hookswitch Assembly
2 Screws
1 Cable tie
1 Gasket
Models 246-001, 247-001, 256-001, 257-001, 341-001
& 351-001
Removal of Old Assembly
1. Remove the front cover screws and pull front cover away from back box/enclosure. Retain the
screws.
2. Disconnect the red (Ring) and green (Tip) wires from TB1. See Figure 2.
3. Disconnect the blue and white reed switch wires from the PCBA at E1 and E2.