Definitions and acronyms – GAI-Tronics XAAB002A Audio Accessory Box User Manual
Page 29

25
11/06
Definitions and Acronyms
Term Definition
Boom Mic
A dispatch center microphone suspended from a movable boom so as to position it in
mid-air at face level to the operator. Usually contains a dynamic-type microphone
element.
Carbon
Standard
PSTN network standard for telephone instruments that features a 50 ohm handset
receiver element. Off-hook state must exhibit between 8 and 20 mA dc and have a ringer
impedance of 11 kilohms or higher. Hybrid isolation must be 10 dB or better over the
voice band.
CSQ
Carrier squelch
Dynamic
Microphone
A low impedance, low level microphone element requiring high gain interface amplifiers.
Electret
A medium impedance, wide frequency range microphone element requiring a bias voltage
supply.
Ixx
GAI-Tronics desk set products such as ILD, ITR, IDR, etc.
Monitor
Action taken to disable the CTCSS or CDCSS system in order to determine if the radio
channel is being currently used by other channel licensees.
POTS
Plain Old Telephone Set: Refers to carbon standard telephone sets having carbon button
microphone elements (low impedance) and dynamic earpiece elements.
PSTN
Public Switched Telephone Network
PTT
Push-To-Talk (transmitter key-up)
RF
Radio Frequency: High frequency energy emitted by an electronic device.
RX
Receive or receiver
TX
Transmit or transmitter