GAI-Tronics ITR2000A Tone Remote Deskset User and Installation Manual - Manual (Page 7)

3 02/12
Description
Features and Benefits of the ITR2000A Tone Remote Desk Set
Feature Benefit
Programmable 4-frequency
function control Any one of 16 EIA standard tones can be programmed for each
frequency/function key.
Parallel status updating Enhanced system flexibility when multiple desk sets are connected in
parallel. Each desk set operator knows the selected frequency.
Line Operated Transmit Light
(LOTL) LEDs indicate when another desk set is transmitting; selectable
speaker mute. Can be used to solve feedback problems.
Intercom capability Desk set users can communicate without radio transmission.
Monitor Users can hear co-channel activity.
Programmable voice delay User can speak immediately after pressing PTT or transmitter without
clipped words.
Front-mounted controls and
adjustments Includes mute/unmute and local speaker on/off.
Parallel TX audio
(two- or four-wire) User can hear audio transmitted by another desk set.
Full-duplex capable with two- or
four-wire Two-wire full-duplex operation with two-wire adapter useful for full-
duplex and trunking radio systems. (See the GAI-Tronics ITA2000.)
Adjustable RX input sensitivity
and TX output level Allows flexibility with different radio systems and user environments
where radio output levels, line loses, and noise factors vary.
Line receive and transmit
compression Automatically normalizes varying input and output levels caused by
system factors.
Built-in internal mic and speaker Allows for handset-free communication.
Audio accessory connection Users have numerous audio accessory options to maximize ease-of-
use and productivity.
Scanning operation (when
installed with ITA2000S
Scanning Adapter) Identifies received audio frequency.