GAI-Tronics 10108-008 Field Maintenance Bulletin: Handset/Cord Replacement Procedure for Model 780 & 7805 Series Div. 1 Hazardous Area Stations - Manual

Pub. 42006-011E
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Field Maintenance Bulletin
Handset/Cord Replacement Procedure
Part No. 10108-107, 10108-10715 & 10108-10725
FOR
M
ODEL
780
AND
7805 S
ERIES
D
IV
. 1 H
AZARDOUS
A
REA
S
TATIONS
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information which is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
Tools Required
 7/16-inch hex socket or combination wrench
 Phillips screwdriver
 Pipe wrench or channel-lock pliers
 Hammer
 Nail set or hardened 1/8-inch diameter rod, approximately 4 inches long
 Torque wrench
Liability Disclaimer
N OTICE : Follow all the steps in the procedure outlined below to ensure personnel safety, to avoid
equipment damage, and to maintain agency approvals.