GAI-Tronics 7165-102 SmartSeries Flush-Mount Single and 5-Party Subsets - Manual (Page 2)

Pub. 42004-643L2E
Model 716-102 and 7165-102 Flush-Mount Subsets Page 2 of 10
f:\standard ioms - current release\42004 instr. manuals\42004-643l2e.doc
04/13
System Requirements and Limitations
The Model 716-102 Single Party and 7165-102 Multi-Party Flush-Mount Subsets must be installed with a
certified remote subset amplifier and a certified Model 7245 Enclosure for proper operation. Mount the
subset in an indoor location within eight feet of the enclosure.
Features and Functions
The subsets provide the following features/functions, when installed with a certified Model Series Remote
Amplifier and Model 7245 Remote Amplifier Enclosure, in a Page/Party
® system:
 Paging
 Party line communication over one party line (Model 716-102 only)
 Selective party line communication over one of up to five party lines (Model 7165-102 only)
 Magnetic hookswitch
The subsets provide the following features/functions, when installed with a certified Model 723 Series
Remote SmartSeries Subset Amplifier and Model 7245 Remote Amplifier Enclosure, in a SmartSeries
ADVANCE system:
 Paging
 Party line communication over one party line
 Selective party line communication over one of up to five party lines (Model 7165-102 only)
 Magnetic hookswitch
 Page duration limit
 Off-hook duration limit
 Normal and alarm mode page destinations
 Normal and alarm mode page priorities
 Normal and alarm mode pre-announcement tones