GAI-Tronics 400-003 IEC / ATEX Zone 1 RigCom Station User Manual
Confidentiality notice, General information
Pub. 42004-460A
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374
800-492-1212 Fax: 610-796-5954
V
ISIT WWW
.
GAI
-
TRONICS
.
COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 400-003 IEC/ATEX
Zone 1 RigCom Station
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
GAI-Tronics Model 400-003 IEC/ATEX Zone 1 RigCom Station is designed for common-talk, or
master/slave communication system operation in IEC Zone 1 hazardous locations.
The unit provides push-to-talk, release-to-listen operation, and has a local on/off volume control switch to
activate and control the volume level for each station independently.
Model 400-003 has three M20 threaded entry holes for system, power, loudspeaker and optional remote
microphone and footswitch connection.
The Model 400-003 is designed to operate with other 400-003 stations, and GAI-Tronics EZ Page Series
of non-hazardous area rated equipment.
Figure 1. Model 400-003 RigCom Station