GAI-Tronics ICS Page/Party Desktop Subset - Manual (Page 2)

Pub. 42004-429B
ICS Page/Party ® Desktop Subset Page 2 of 4
e:\standard ioms - current release\42004 instr. manuals\42004-429b.doc
11/13
Installation
WARNING
Do not install this equipment in hazardous areas. Such installations may
cause a safety hazard and consequent injury or property damage.
Figure 2. ICS Multi-Party Desktop (wall-mount) Subset Outline
N OTE : The desktop subset can be placed on a desk or can be wall mounted. When mounting the desktop
subset to a wall, first remove the four screws from the bottom of the housing. Rotate the bottom section
of the housing 180º and reassemble the top and bottom with the four screws. This will allow the subset to
be attached to a vertical surface. To allow the handset to remain on hook when wall mounted, pull out the
handset hook and rotate 180º.
1. Place the subset at the desired location and plug in the interconnect cable. Route the opposite end of
the cable to the remote amplifier location.
2. Plug the interconnect cable into the remote amplifier.