GAI-Tronics 10458-101 600-Ohm / RF Electronics Paging Module - Manual (Page 3)

Pub. 42004-415B
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 10458-10x
600-Ohm/RF Electronic Paging Module
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive business and
technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains all intellectual property and other
rights in or to the information contained herein, and such information may only be used in connection with the operation of your
GAI-Tronics product or system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
Product Overview
GAI-Tronics’ Electronics Paging Modules are mechanically designed for mounting to the access panel in
Model 234 Series Stanchions. Each paging module can be used with the Model 234SBM Stanchion
Broadcast Module or Model 234SBA Stanchion Broadcast Assembly to supply an amplified broadcast to
stanchion speakers.
Features
 Hardwired (600-ohm) and RF audio delivery
to amplifier.
 One-way page broadcasts over system
speakers.
 A high-efficiency (>80%) Class D amplifier to
provide up to 10 watts into a 4-ohm load (>110
dB SPL from each speaker, measured at 1
meter on axis).
 Generic Operation - (common broadcast) using
input contact closure.
 Selective Operation - addressability for
individual unit, group/zone, or system-wide
broadcasts using DTMF or 2-Tone signaling
access.
 Remote volume control using DTMF
signaling.
 Universal ac input power supply provided.
 Battery trickle charge during normal operation.
 Programmable output control for strobe activation.
 PC programmable using the CARD Suite Programming Software Application.
Figure 1.