GAI-Tronics 12599-002 Hot Standby Amplifier Module - Manual (Page 17)

Pub. 42004-412A
Model 12599-002 Hot Standby Amplifier Module Page: 17 of 17
\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-412a.doc
06/08
Specifications
Electrical
Power requirements ............................................................................... 9.5 to 14 V dc (12 V dc nominal)
Current draw .............................................................................................. 300 mA maximum @ 12 V dc
Number of amplifier inputs.................................................................. 6-single channel or 3-dual channel
Fault input terminal voltage (Wet mode)........................................................................ 12 V dc (nominal)
Fault input voltage range (Wet mode) ............................................10–15 V dc (active); <8 V dc (inactive)
Fault input circuit current (Wet mode) ............................................................................................1.2 mA
Number of fault output contacts................................... 6 (single-channel mode) or 3 (dual-channel mode)
Fault output contact type ................................................................................................ Single Form “C”
Fault output contact rating ................................................................................. 2 A maximum @ 30 V dc
Amplifier Audio Switching
Amplifier type ........................................................................................................ Single or dual-channel
Audio input levels (typical per circuit) ................................ 600 ohm @ 0.775 Vrms (0 dBm) to 1.5 Vrms
Amplifier output power (maximum per circuit)............................................. 700 watts (100% duty cycle)
Speaker load switching.................................................................................. Standard 4, 8 or 16-ohms, or
25 V, 70 V or 100 V constant voltage lines
Terminations
Type..................................................................................................... Modular (plug-in) terminal blocks
Minimum conductor size ...................................................................................... No. 28 AWG (0.5 mm 2 )
Maximum conductor size...................................................................................... No. 12 AWG (3.0 mm
2
)
Mechanical
Module dimensions .................................... 12.00 L
× 4.00 W × 1.25 H inches (304.8 × 101.6 × 31.7 mm)
Module weight ................................................................................................................. 1.1 lbs. (0.5 kg)
Environmental
Temperature range (operating/storage)...................................................... 32
° F to 140° F (0° C to 60° C)
Humidity........................................................................................85% relative non-condensing humidity