GAI-Tronics 530-001 L.E.D. Strobe with Constant-on Feature - Manual (Page 3)

Pub. 42004-395I
Model 530-001 LED Strobe with Constant-On Feature Page 3 of 3
f:\standard ioms - current release\42004 instr. manuals\42004-395i.doc
03/15
Specifications
Operating voltage ........................................................................................... *Regulated 120 V ac @ 60 Hz
Nominal current ........................................................................................................................ 0.44 amperes
N OTE : The rated 0.44A current at 120 V ac 60 Hz is average during operation of the steady lights or
strobing LED. A short duration inrush current as high as 45 amps may be experienced when power is
first applied to the strobe. Current limiting and/or current protection devices should be specified
accordingly.
Rated LED life ............................................................................................................... Up to 100,000 hours
Flash rate ..................................................................................................................... 240 flashes per minute
Auxiliary contact maximum rating ................................................................................. 2 amps @ 240 V ac
2 amps @ 30 V dc
Operating (environment) temperature range ....................................... -40° C to +66° C (-40° F to +150° F)
Environmental ...................................................................... NEMA-3R (when mounted with dome upright)
Terminations (ac, control, auxiliary contact) ...................................................... 15-foot, No. 18 AWG wire
Construction: Base: ..................................... Die-cast aluminum (light gray, baked enamel finish)
Dome: ..................................................................................... Polycarbonate (blue)
Dimensions ......................................................................... 7.75 H
 8.25 W inches (196.85  209.55 mm)
Shipping weight .................................................................................................................................. 7.5 lbs.
Mounting ............................................................................................................................ ¾-14 NPT female
Approvals .......................................................................................................................................... UL/ cUL
LED Coil Data
Nominal voltage ................................................................................................................................. 24 V dc
Nominal current .................................................................................................................................. 14 mA
Accessories
Part No. Description
4115A Mounting Assembly Kit
530-001DCL Replacement Electronics Assembly
W ARRANTY N OTE : LED replacement is not covered under warranty.
*Tested voltage range is 96–132 V ac.