GAI-Tronics 293-101 Externally Powered ADA-Compliant Emergency Phones - Manual (Page 20)

Pub. 42004-378C
E XTERNALLY P OWERED ADA-C OMPLIANT E MERGENCY P HONES P AGE 19 of 28
\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-378c.doc
08/06
Ring-down Operation
Ring-down operation enables the telephone to go off-hook when the E MERGENCY push button is pressed.
The ring-down system must detect loop current and ring-down to the appropriate telephone.
Feature Key
Sequence
Description
Default
Emergency
Button Auto-dial
Number 1 DD ... *1 Assigns a telephone number to the auto-dial memory 1. DD ...
represents the telephone number, which can be up to 20 digits in
length.
For access to an outside line, a pause may be required in the
telephone number to wait for secondary dial tone. The #
represents a pause in the telephone number.
Examples:
To assign the police emergency number 911 to the auto-dial
button, enter 911*1.
To assign 911 when a “9” is required to gain access to a CO
line, enter 9*#911*1.
To store * or # as part of the auto-dial number, (such as for
speed dialing), enter these digits twice in succession.
*123456
789*0#
Emergency
Button Auto-dial
Number 2 DD ... *2 Same as Emergency Button Auto-dial Number 1 except the
sequence ends in *2 instead of *1. None
Emergency
Button Auto-dial
Number 3 DD ... *3 Same as Emergency Button Auto-dial Number 1 except the
sequence ends in *3 instead of *1. None
Call Button
Auto-dial DD ... *4 Same as Emergency Button Auto-dial Number 1 except the
sequence ends in *4 instead of *1. None
Primary Dial
Tone Delay # 1 0 N N The dial tone delay is the amount of time the unit waits for a
dial tone before auto-dialing the telephone number. (00
[infinite]; 01-15 seconds)
Example: To wait five seconds for a dial tone, enter # 1 0 0 5.
00
(Infinite)
Secondary Dial
Tone Delay # 1 1 N N This feature is only used if you must dial 9 to access an outside
line. It determines the amount of time (00-15 seconds) the
telephone waits for a second dial tone. The first programming
step indicated you must program 9*# and the number you want
the auto-dial to access. This programming parameter allows
you to choose the amount of time the telephone waits after
encountering # before dialing the auto-dial number.
Example: To wait ten seconds for the second dial tone, enter
#
1 1 1 0.
00 (0
seconds)
Ring-down
Operation *1
This option clears the telephone number to prevent auto-dialing
when the button is pressed. Once the button is pressed, the ring-
down system must detect loop current and ring-down to the
appropriate telephone. None