GAI-Tronics 12584-001 I/O Control Module (for AMI) - Manual

Pub. 42004-359B
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 12584-001
I/O Control Module
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12584-001 I/O Control Module provides 32 dry contact inputs and 32 digital outputs. The
control module requires a 12 or 24 volt dc power supply. For communication and control by other
systems, the control module is equipped with two types of serial data interfaces (RS-232 and RS-485).
Data Connections
The I/O Control Module supports both RS485
and RS-232 data connections. A jumper is
provided to select either RS-485 or RS-232
data communications. The use of either the
RS-485 or RS-232 is dependent on the
application. Please refer to the
interconnecting device for data connection
details (i.e., AMI manual).
For RS-485, the data connections are made
directly to TB2, terminals 1 and 2. Typically,
TB2-1 (+) and TB2-2 (-) connect to the
corresponding + and – terminals on the
controlling device.
For RS-232, a standard male DB-9 connector is provided. A null modem cable should be used when
connecting to the controlling device.
Figure 1. Model 12584-001 I/O Control Module