GAI-Tronics 227-001 Auto-dial Telephones - Manual

Pub. 42004-338F
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 227-001, 247-001, 257-001, and 277-001
Industrial Auto-dial Telephones
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
GAI-Tronics Rugged Auto-Dial Telephones are ideally suited for conditions that are too harsh for a
standard telephone. When the handset is removed from the cradle, a preprogrammed number of up to 31
digits is automatically dialed. The telephones are fully line-powered and do not require internal batteries.
This manual applies to the following telephones:
 Model 227-001 Public Access Auto-dial Telephone
 Model 247-001 Indoor Industrial Auto-dial Telephone
 Model 257-001 Weatherproof Industrial Auto-dial Telephone
 Model 277-001 Flush-Mount Auto-dial Telephone
Operation
To auto-dial the stored telephone number, follow these instructions:
1. Lift the handset. After approximately 1 second, the preprogrammed number is dialed automatically.
2. The handset receiver volume control, which is located on the handset, can be adjusted to the desired
level by pressing the handset pressbar.
N OTE : Pressing the handset pressbar increases the volume in 3-dB increments. The volume starts at
0 dB and increases to a maximum volume of 18 dB. Pressing the pressbar a seventh time returns the
volume to 0 dB.
3. To redial, place the handset on hook and wait approximately 3 seconds. Lift the handset and the
preprogrammed number is redialed.