GAI-Tronics 226-001 Industrial Telephones with Keypads - Manual (Page 9)

Pub. 42004-337F
Model 226-001, 246-001, 256-001, and 276-001 Industrial Telephones with Keypads Page 9 of 18
f:\standard ioms - current release\42004 instr. manuals\42004-337f.doc
06/12
7. If mounted outdoors, install a telephone line suppressor (customer-supplied) on the telephone line.
8. Connect the telephone cord to the PCBA terminal strip. See Figure 7 for details.
9. Close the front half of the enclosure and secure it by replacing the four outermost screws.
10. Connect the telephone’s modular cord to the incoming subscriber line with the appropriate mating
connector. Verify operation by calling to and from another telephone.
Figure 10. Model 256-001 Mounting Detail