GAI-Tronics 226-001 Industrial Telephones with Keypads - Manual (Page 5)

Pub. 42004-337F
Model 226-001, 246-001, 256-001, and 276-001 Industrial Telephones with Keypads Page 5 of 18
f:\standard ioms - current release\42004 instr. manuals\42004-337f.doc
06/12
6. If mounted outdoors, install a telephone line suppressor (customer-supplied) on the telephone line.
7. Pull the telephone line through the conduit and into the enclosure. Connect the telephone’s modular
cord to the incoming subscriber line with the appropriate connector. Verify operation by calling to
and from another telephone.
8. Replace the front panel assembly and tighten the eight front panel screws.
Figure 5. Model 226-001 Outline and Mounting Drawing