Speaker muting information, Mutual muting – GAI-Tronics 785-002 24 V DC Explosion-proof Page/Party Handset Stations User Manual
Page 7
Pub. 42004-157E
Model 780/785-002 and 7805/7855-002 24 V DC Explosion-proof Handset Stations
Page 7 of
13
f:\standard ioms - current release\42004 instr. manuals\42004-157e.doc
08/13
Speaker Muting Information
These stations are equipped with a muting feature that is used if the station is located near other
handset/speaker stations. This feature prevents acoustic feedback between stations during paging by
muting the station’s associated speaker. These stations are shipped from the factory with the mute feature
enabled.
To disable the muting feature, remove jumper W6 located on the 10489-002 Termination PCBA.. The
chart below describes how the muting function operates when specific combinations of wire jumpers W3,
W4, W5, and W6 are installed on the Termination PCBA.
W3 W4 W5 W6
Description
of
Operation
O
X
X
X
AUX/PAGE inputs to the amplifier are muted during station page (as
shipped from GAI-Tronics—see the note).
O
X
X
O
AUX/PAGE inputs to the amplifier are not muted during a station page.
O
X
O
X
PAGE input is muted only during a station page.
X
X
O
X
PAGE input is muted during a station page or by contact closure between the
Mute A and B inputs.
X
O
X
X
PAGE/AUX inputs are muted during a station page or by contact closure
between the Mute A and B inputs.
X
O
O
O
PAGE/AUX inputs are not muted. Isolated normally open relay contact
output between the Mute A and B terminals is closed during station pages.
X
= Installed
O = Not Installed.
Mutual Muting
N
OTE
: Jumpers W4, W5, and W6 must be installed.
Stations that are located closely together may require mutual muting of the page amplifiers. To
accomplish mutual muting between stations, connect the orange (spare) wire in the GAI-Tronics station
cable to TB2-A on each of the Div. 1 stations that require muting. All the mutually muted stations are
muted when any connected station is paging.
Mutual muting can be accomplished between the Div. 1 stations and Div. 2 enclosures using most
GAI-Tronics 600 or 700 Series enclosures by connecting the orange (spare) wire between TB2-11(A) on
the Div. 1 station and TB1-7 on the Div. 2 enclosure:
Div. 1 Stations
(TB2-A)
Div. 2 Enclosures (TB1-7)
670-002 702-002
733-002
703-002
780-002 732-102
7335-002
7805-002 7325-102
758-002
Consult GAI-Tronics for any enclosures not listed.
N
OTE
: The auxiliary speaker amplifier input is a balanced 10-kilohm audio input.