FSR SPC-20X - Manual (Page 4)

POWER PRODUCT GROUP
Phone: 973-785-4347 Fax: 973-785-3318 Web: www.fsrinc.com E-Mail: [email protected]
FSR
SPECIFICATIONS
RJ-12 to RJ-12 wired straight through (pin to
pin)
AC SWITCHING: Solid state zero crossing (no relays that bounce,
arc, and pit)
AC INPUT 120VAC, 60 Hz, 20Amps max.
AC INPUT: Full line conditioning and RFI suppression
AC OUTLET: Surge suppression on the outlet
AC OUTLET: Total output current must not exceed 16
Amps. The AC outlet is rated at 16
Amps but remember that the total cur
rent out of the SPC-20X must not ex
ceed 16 Amps.
CONTROL RJ-12 to RJ-12 wired straight through (pin to pin)
SURGE PROTECTION:
Spike protection modes: Line to neutral, neutral to
ground,line to ground
Spike protection voltage: Max clamping voltage 340V
peak, L-N, N-G, L-G
Response time: 1 nanosecond
Maximum surge current: >29000 AMPS (8x20 usec
pulse)
Maximum spike energy: >200 joules
Noise attenuation: Differential 13 dB @ 150 kHz increas
ing to 45 dB @ 30 Mhz
Common mode: 15 dB @ 150 kHz, increasing to >45 dB
@ 30 Mhz
SIZE: 6" x 5 1/2" x 3"
WEIGHT: 4 pounds
RJ-12 to RJ-12 wired straight through (pin to pin)
RJ-12 to RJ-12 wired straight through (pin to pin)