FSR ML-116 - Manual (Page 5)

FSR
ML-116 INSTALLATION DATA
Telephone 973-785-4347 page 5
INTRODUCTION
The design of the ML-116 system takes advantage of current technology to provide a blend of reliabil-
ity, ease of use, flexibility, and reasonable cost. Designed for Hotels and Conference Centers with
divisible, multi-use meeting rooms, the ML-116 unifies the audio system of each room being joined
together with the touch of a button. Each control panel, speaker, amp, etc. will automatically operate as
one sound system. Any number of rooms (up to 16 per system) can be combined in any number of
groups. Provided custom software allows the system to be tailored to specific system requirements.
The ML-116 eliminates the need for skilled operators and can be used by staff members with minimum
instruction. The combining can be controlled from multiple locations depending on the system op-
tions, and specific functions can be controlled from each room. The quality of the sound system is not
compromised by this system. Built-in safeguards prevent system failure due to misuse or failure of one
component.
The entire ML-116 system includes:
o ACU Audio Control Unit (base ML-116 chassis)
o PSA Power Supply
o Wallplates One per room
o MLH-8/16/24/32 Head Table Speaker Controls (optional)
o MAP Graphic Map Panel (optional)
o MON Monitor/VU Panel (optional)
o FMP Facility Manager Panel Interface (optional)
o AUD Remote Audio Monitoring (optional)
o RMAP Remote Map Panel (optional)
o RMON Remote Monitor Panel (optional)
o TC Remote Map and Monitor LCD Touch Panel (optonal)
o CNTL Control System Interface (optonal)
o INT Map Panel Status Interface (optonal)
o LU Lutron® Lighting Interface (optonal)
o IM / UM Installation Manual / User Manual
In each room a wallplate controls music and local input functions (local input on/off, room mixer
enable, music select, and volume up/down switches for local input and music.) A bar graph display is
provided for local input and music.
The security key switch prevents unauthorized control of the system. Dip switches inside the Audio
Control Unit determine whether the key switch interlocks all the wallplate functions, microphone func-
tions only, or no wallplate functions.
The system is shipped in a default setting which will permit instant operation of the system in its usual
configuration. Please refer to the Dip switch/Jumper settings for pertinent details on the switch func-
tions.