Foxconn P4M800P7MA-ERS2 User Manual
Page 53
Chapter 3 BIOS Description
46
IRQs Activity Monitoring Menu
v
Primary INTR
Selecting “ON” will cause the system to wake up from power saving modes
if activity is detected from any enabled IRQ channels. The setting values
are: ON and OFF.
v
IRQ3 (COM2)
This option is used to enable or disable IRQ3 (COM2) activity monitoring. The
setting value are: Disabled and Enabled.
v
IRQ4 (COM1)
This option is used to enable or disable IRQ4 (COM1) activity monitoring. The
setting value are: Disabled and Enabled.
v
IRQ5 (LPT2)
This option is used to enable or disable IRQ5 (LPT2) activity monitoring. The
setting value are: Disabled and Enabled.
v
IRQ6 (Floppy Disk)
This option is used to enable or disable IRQ6 (Floppy Disk) activity monitoring.
The setting values are: Disabled and Enabled.
v
IRQ7 (LPT1)
This option is used to enable or disable IRQ7 (LPT1) activity monitoring. The
setting value are: Disabled and Enabled.
v
IRQ8 (RTC Alarm)
This option is used to enable or disable IRQ8 (RTC Alarm) activity monitoring.
The setting values are: Disabled and Enabled.
v
IRQ9 (IRQ2 Redir)
This option is used to enable or disable IRQ9 (IRQ2 Redir) activity monitoring.
The setting values are: Disabled and Enabled.
PDF 文件使用 "pdfFactory" 试用版本创建