Foxconn P4M800P7MA-ERS2 User Manual
Page 36
Chapter 3 BIOS Description
28
v
Hyper-Threading Technology
This option is used to turn on or off the Hyper-Threading function of the CPU.
The available setting values are: Disabled and Enabled.
Note: This function will not be displayed until a CPU that supports
Hyper-Threading has been installed.
v
CPU L2 Cache ECC Checking
This option is used to enable or disable CPU L2 cache ECC Checking. The
setting values are: Disabled and Enabled.
v
Quick Power On Self Test
Enable this option to shorten the power on testing (POST) and have your sys-
tem start up faster. The setting values are: Disabled and Enabled.
v
First/Second/Third Boot Device
This option allows you to set the boot device’s sequence.
v
Boot Other Device
With this function set to enable, the system will boot from some other de-
vices if the first/second/third boot devices failed. The setting values are: Dis-
abled and Enabled.
v
Boot Up NumLock Status
This option defines if the keyboard Num Lock key is active when your system
is started. The setting values are: On and Off.
v
Typematic Rate Setting
If this option is enabled, you can use the following two items to see the
typematic rate and the typematic delay settings for your keyboard. The avail-
able setting values are: Disabled and Enabled.
v
Typematic Rate (Chars/Sec)
Use this option to define how many characters per second a held-down
key generated.
v
Typematic Delay (Msec)
Use this option to define how many milliseconds must elapse before a held-
down key beings generating repeat characters.
PDF 文件使用 "pdfFactory" 试用版本创建