Foxconn P4M800P7MA-ERS2 - Manual (Page 49)

Chapter 3 BIOS Description
41
v Parallel Port Mode
Select an address and corresponding interrupt for the onboard parallel port.
The setting values are: SPP, EPP, ECP, ECP+EPP.
v ECP Mode Use DMA
When the Parallel Port Mode is set to ECP or ECP+ EPP, this option is used to
select the channel for the ECP mode. The setting values are: 1 and 3.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn