Foxconn P4M800P7MA-ERS2 - Manual (Page 17)

Chapter 2 Installation Instructions
10
Memory
This motherboard includes two 184-pin slots with 2.6V for DDR and two 240-pin
slots with 1.8V for DDR2. DIMM1 and DIMM
2 slots(blue) support 256 Mb, 512 Mb
and 1 Gb DDR2 technologies for x8 and x16 devices; DIMM 3 and DIMM4(yellow)
slots support 256 Mb, 512 Mb and 1 Gb DDR technologies for x8 and x16 devices.
You must install at least one memory bank to ensure normal operation.
Attention:
1. Before you install memory modules, please make sure that all
DIMMs in one system are of the same type (e.g. all DDR or all
DDR2, not mixed).
2. If DDR and DDR2 memory banks are installed simultaneously
or all four sockets are populated with DIMMs, the buzzer will alarm
for memory error warning and power-on failure may result.
For the latest memory modules support list, please visit the website:
http://www.foxconnchannel.com
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn