Foxconn P35A - Manual (Page 81)

74
5
1. Find another PC, put a diskette into
its floppy drive A:, this diskette will be
formatted later. Put the P35A driver CD
into CD-ROM drive, after the screen
comes out, click on "Utility" icon, then
click on "
Create RAID Driver Floppy"
icon.
2. A message pops out telling you where to
find the routine in driver CD to create the
driver diskette.
3. Depending on which platform your XP
system is, normally, it is a 32-bit system.
Use Windows explorer, and go to
CD:\
Driver\Intel\RAID\Floppy\Win2K_XP,
click on
F6flpy32.exe to start the creation.
4. Asking you to insert a diskette into floppy
drive A:.
5-1 Create a RAID driver diskette
If you want to install a brand new Windows XP on a RAID system, you need to configure
the SATA Mode in BIOS to either AHCI or RAID first. You also need to create a RAID
driver floppy diskette which will be used during Windows XP installation later.
Windows Vista has native RAID driver in itself, you can skip these steps.