Foxconn P35A User Manual
Page 27
This chapter tells how to change system settings through
the BIOS Setup menus. Detailed descriptions of the BIOS
parameters are also provided.
You have to run the Setup Program when the following cases
occur :
1. An error message appears on the screen during the system
Power-On Self-Test (POST) process.
2. You want to change the default CMOS settings.
This chapter includes the following information:
■ Enter BIOS Setup
■ Main Menu
■ Standard BIOS Features
■ Fox Central Control Unit
■ Boot Configuration Features
■ Advanced BIOS Features
■ PCI/PNP Resource Management
■ Power Management Features
■ Hardware Health Configure
■ BIOS Security Features
■ Load Optimal Defaults
■ Load FailSafe Defaults
■ Save Changes and Exit
■ Discard Changes and Exit
Since BIOS could be updated some other times, the BIOS information described
in this manual is for reference only. We do not guarantee the content of this
manual will remain consistent with the newly released BIOS at any given time in
the future. Please visit our support website for updated manual if it is available.