Foxconn P35A - Manual (Page 72)

65
4
3-2 Configure - System
This page lets you set the backup BIOS location and change different skin of the Fox LiveUpdate
utility.
3-3 Configure - Advance
This page lets you select to flash BIOS / Boot Block and clear CMOS. If you choose Flash Boot
Block, it means BIOS is not protective, and you must make sure the flash process is continuous
and without any interruption.
CA
UT
IO
N
!
We recommend that you should better keep the default setting unchanged to avoid any
damage.
Click here
Set the location of
download files or
auto backup BIOS
Determine if the FOX LiveUpdate can
auto run when the system starts up
Select different skin
of the software
Apply the changes
Reset to default value
Click here
Select which BIOS ROM
to flash(Only available to
Motherboard with backup
BIOS ROM )
Apply the changes Reset to default value
Select to flash Boot Block
Select to clear CMOS