Foxconn RC4107MA-8KRS2 - Manual (Page 54)

Chapter 3 BIOS Description
47
PnP/PCI Configurations
v Reset Configuration Data
This option is used to set whether the system is permitted to automatically
distribute IRQ DMA and I/O addresses when each time the machine is turned
on. The setting values are: Disabled and Enabled.
v Resources Controlled By
This option is used to define the system resource control scheme. If all cards
you use support PnP, then select Auto (ESCD) and the BIOS will automatically
distribute interruption resources. If the ISA cards you installed do not support
PnP, you will need to select “Manual” and manually adjust interruption
resources in the event of hardware conflicts. However, since this motherboard
has no ISA slot, this option does not apply.
v IRQ Resources
Only when the “Resoureces Controlled By” is set as “Manual” can this option
be modified. Press the key, then manually set IRQ resources.
v PCI/VGA Palette Snoop
If you use a nonstandard VGA card, use this option to solve graphic
acceleration card or MPEG audio card problems (e.g., colors not accurately
displayed). The setting values are: Disabled and Enabled.
v Assign IRQ For VGA
Most modern graphics cards require an IRQ to function properly. Disabling
this feature with such cards will cause improper operation and/or poor
performance. Enabled: For most modern graphics cards. Disabled: disable
this feature to release an IRQ for other uses.
PnP/PCI Configurations Menu
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn