Foxconn RC4107MA-8KRS2 User Manual
Page 48
Chapter 3 BIOS Description
41
v
IDE HDD Block Mode
This option is used to set whether the IDE HDD block mode is allowed. The
available setting values are: Disabled and Enabled.
v
Onboard Lan Boot ROM
This option is used to decide whether to invoke the boot ROM of the onboard
LAN chip.
v
Power On By Mouse
This option is used to set power on by mouse.
v
Power On By Keyboard
This option is used to power on by keyboard.
v
KB Power ON Password
When the POWER ON Function is set to Password, use this item to set the
password.
v
Hot Key Power ON
When the POWER ON Function is set to Hot KEY, use this item to set the hot
key combination that turns on the system.
v
Onboard FDC Controller
This option is used to set whether the onboard FDC controller is enabled.
v
Onboard Serial Port 1/2
This option is used to assign the I/O address and interrupt request (IRQ) for
the onboard serial port 1/2. The onboard serial port 2 I/O address and IRQ is
for IrDA using.
v
UART Mode Select
Use this option to select the UART mode. Setting values include Normal,
IrDA, ASKIR. The setting value is determined by the infrared module installed
on the board.
PDF 文件使用 "pdfFactory" 试用版本创建