Foxconn RC4107MA-8KRS2 User Manual
Page 22

Chapter 2 Installation Instructions
15
Other Connectors
This motherboard includes connectors for floppy devices, IDE HDD devices,
Serial ATA devices, USB devices, IR module, and others.
FDD connector: FLOPPY
This motherboard includes a standard FDD connector, supporting 360 K, 720
K, 1.2 M, 1.44 M, and 2.88 M FDDs.
HDD connectors: SIDE & PIDE
This motherboard includes two Ultra DMA 133/100/66/33 IDE connectors (SIDE
& PIDE). These connectors support the provided Ultra DMA IDE ribbon cables.
We suggest you connect the cable’s blue connector to the IDE connector, then
connect the black connector to the master device and connect the grey connec-
tor to the slave device.
Attention:
Ribbon cables are directional, therefore, make sure to always con-
nect with the cable on the same side as pin 1 of the SIDE/PIDE or
FDD connector on the motherboard.