Foxconn RC4107MA-8KRS2 User Manual
Page 53
Chapter 3 BIOS Description
46
v
HDD Power Down
This option is used to turn off hard disk power if the hard disk is idle for a given
period of time.
v
Vdieo Off Method
This option is used to define the video off method. “Blank Screen” mode
means that after the computer enters power saving mode, only the monitor
will close, however, the vertical and horizontal scanning movement of the screen
continues. When you select the “V/H SYNC + Blank” mode the vertical and
horizontal scanning movement of screen stops when the computer enters
power saving mode. “DPMS” mode is a new screen power management system,
and it needs to be supported by the monitor you’re using.
v
Video Off In Suspend
This option is used to determine whether the video is turned off when the
system enters sleep mode.
v
MODEM Use IRQ
This option is used to set the IRQ in which the modem can use. The system
will automatically wake up when the modem receives an incoming call.
v
Soft-Off by PWR-BTTN
This option is used to set the power down method. This function is only valid
for systems using an ATX power supply.
When “Instant-Off” is selected, press the power switch to immediately turn off
power. When “Delay 4 Sec.” is selected, press and hold the power button for
four seconds to turn off power.
v
PowerOn by PCI Card
This option is used to set power on by PCI card to wake on LAN.
v
Modem Ring Resume
This option is used to set what action the PC will take with the power supply
when it resumes after a sudden power failure. The available options are: Off
(remain in turn off status),On (auto power on) and Former-Sts (resume with
the previous status).
v
RTC Alarm Resume
This field enables the user to set the option to enable an RTC Alarm (real time
clock) to wake up the computer system from power saving mode. When this
option is enabled another field allowing the user to set the alarm time on,
appears.
PDF 文件使用 "pdfFactory" 试用版本创建