Foxconn RC4107MA-8KRS2 User Manual
Page 42
Chapter 3 BIOS Description
35
v
First/Second/Third Boot Device
This option allows you to set the boot device sequence.
v
Boot Other Device
With this function set to Enabled, the system will boot from some other
devices if the first/second/third boot devices failed.
v
Boot Up Floppy Seek
This option controls whether the BIOS checks for a floppy drive while booting
up. If it cannot detect one (either due to improper configuration or physical
unavailability), it will appear an error message.
v
Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your system is
started.
v
Gate A20 Option
This option is used to set up the A20 signal control necessary for access to
the 1MB memory.
v
Typematic Rate Setting
If this item is enabled, you can use the following two items to see the typematic
rate and the typematic delay settings for your keyboard. The available setting
values are: Disabled and Enabled.
v
Typematic Rate (Chars/Sec)
Use this item to define how many characters per second a held-down key
generated.
v
Typematic Delay (Msec)
Use this item to define how many milliseconds must elapse before a held-
down key begins generating repeated characters.
v
Security Option
When it is set to “Setup”, a password is required to enter the CMOS Setup
screen; When it is set to “System”, a password is required not only to enter
CMOS Setup, but also to startup your PC.
PDF 文件使用 "pdfFactory" 试用版本创建