Foxconn RC4107MA-8KRS2 User Manual
Page 19
Chapter 2 Installation Instructions
12
Memory
This motherboard accomodates two 240-pin DDR2 DIMM slots. These slots
support 256 Mb, 512 Mb and 1 Gb DDR2 technologies for x8 , x16 and x32
devices. Before you install memory modules, please make sure that all DIMMs
in one system are of the same type. To ensure normal operation, you must
install at least one memory bank.
For the lastest memory modules support list, please visit the website:
http://www.foxconnchannel.com
Installation of DDR2 Memory
1. There is only one gap in the middle of the DIMM slot, and the memory
module can be fixed in one direction only. Unlock a DIMM slot by pressing the
module clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically
into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
128 Pins
112 Pins
DIMM1
DIMM2
PDF 文件使用 "pdfFactory" 试用版本创建