Foxconn 761MX User Manual
Page 35
Chapter 2 BIOS Description
30
8.4
CPU/System Temperature
The CPU/System temperature will be automatically detected by the system.
8.5
CPU Fan Speed/System Fan Speed/NB FAN Speed
The CPU/system/NB fan speed will be automatically detected by the system.
8.6
Smart Fan Control
This item is used to enable or disable smart fan function.
8.7
PWM Start Temp[
0
C]
This item is used to set beginning temperature. when temperature gets to
this value, Smart Fan starts to take effect.
8.8
Start PWM Value[0~127]
This item is used to set the beginning rotated speed for Smart Fan.
8.9
slope PWM Value
This item is used to set the rotated speed level which Smart Fan varies with
variational temperature. When temperature increase one degree, rotated speed
raises the set level.
8.10 Delta Temp[
0
C]
when "Smart Fan Control" is Enabled.This option can key in from 0 to 31.
10. Load Optimized Defaults
This menu can let you load the optimized defaults set by BIOS, which have set
the optimized performance parameters of system to improve the performances
of system components.You can select
load or not load the optimized defaults.
9. Load Fail-safe Defaults
This menu allows you to load defaults set by BIOS ,which have set the basic
functions of system in order to ensure the stability of system.You can select
11. Set Supervisor Password
Set User Password
The access rights and permissions associated with the Supervisor password
are higher than those of a regular User password. The Supervisor password
can be used to start the system or modify the CMOS settings. The User pass
word can also start the system. While the User password can be used to view
the current CMOS settings, these settings cannot be modified using the
User password.When you select the Set Supervisor/User Password option, the
following message will appear in the center of the screen, which will help you to
set the password:
Enter Password:
PDF 文件使用 "pdfFactory" 试用版本创建