Foxconn 761MX User Manual
Page 26
Chapter 2 BIOS Description
21
Enter BIOS Setup
The BIOS is the communication bridge between hardware and software,
correctly setting up the BIOS parameters is critical to maintain optimal system
performance. Power on the computer, when the following message briefly
appears at the bottom of the screen during the POST (Power On Self Test),
press key to enter the BIOS CMOS Setup Utility.
Press TAB to show POST Screen, DEL to enter SETUP, ESC to enter Boot Menu.
Main Menu
The main menu displays a list of options that are available. Use the arrow keys
to select among the items, when the correlative information of the the items will
appear at the bottom, and execute the sub-menu by pressing
Main Menu
Note:
W e do not suggest that you change the default parameters in the BIOS Setup,
and we shall not be responsible for any damage that result from any changes
that you make.
The items in the main menu are explained as below:
1. Standard CMOS Features
The basic system configuration can be set up through this menu.
2. Fox Central Control Unit
The special features can be set up by this menu.
3. Advanced BIOS Features
The advanced system features can be set up through this menu.
4. Advanced Chipset Features
The advanced chipset features can be set up through this menu.
5. Integrated Peripherals
All onboard peripherals can be set up through this menu.
6. Power Management setup
Through this menu you can set up all the items of Green function features.
PDF 文件使用 "pdfFactory" 试用版本创建