Foxconn 761MX User Manual

Page 24

Text mode
Original mode

Chapter 1 Main Features

Keyboard Jumper: KBPWR
This jumper allows you to enable or disable the Keyboard
wake-up feature. To use it, firstly you need set “Power
Management Setup”=>“PM wake up Events”=>“Power On
By Keyboard ” to “Any KEY” or “Hot KEY” in the COMS Setup.
Secondly please set the jumper to pins 2-3(+5VSB) .Now
you are able to wake up the computer from S3 , S4 and S5
sleep modes by pressing any key or the hot key on the
keyboard. If you set “Power On By Keyboard ” to “Password”,
Please set the password by entering “KB Power On Pass-
word ”. If you set “Power On By Keyboard ” to “Keyboard 98”,
you can wake up your computer from sleep modes by
pressing the “Power” key on keyboard 98.

+5V

(Default)

+5VSB

KBPWR

PDF 文件使用 "pdfFactory" 试用版本创建